The Kamal Agrotech LDPE Lapeta Pipe is a premium-grade Lay-Flat Hose Pipe used for water delivery, irrigation, and rain-pipe applications across farms, gardens, and greenhouses. Made from pure nylon-blended LDPE (Low-Density Polyethylene), the 3-inch diameter Lapeta Pipe 3 inch rolls out flat when empty and inflates round under water pressure, making it lightweight, easy to roll up, and quick to lay across long distances. The white finish reflects sunlight, keeping water cooler in the line and protecting the pipe from UV breakdown. Available in multiple lengths from 40 to 200 feet, this 3 inch Lapeta Pipe handles pump-fed irrigation, flood irrigation, sprinkler systems, and general water transfer with a strong flow rate and high burst resistance.
Key Features and Benefits:
Pure Nylon LDPE Construction: The Lapeta Pipe 3 inch uses nylon-blended LDPE for superior tear resistance, flexibility, and a longer working life under field conditions.
3-Inch Wide Diameter: The 3 inch Lapeta Pipe gives a strong, fast water flow rate — perfect for flood irrigation and bigger field areas.
Lay-Flat Design: The Lay-Flat Hose Pipe rolls up compact and flat when empty, taking far less storage space than a rigid PVC pipe of the same length.
UV Stabilised: The Lapeta Pipe 3 inch is treated with anti-UV additives that resist sun damage, fading, and cracking over many seasons of outdoor use.
White Reflective Finish: The white outer surface reflects sunlight, keeping the water inside cooler and reducing heat stress on sensitive crops and tender seedlings.
High Burst Pressure: The 3 inch Lapeta Pipe is engineered for high working pressure, holding up well against pump surges and sudden water hammer.
Versatile Use: The 3 inch Lapeta Pipe works with submersible pumps, monoblock pumps, tractor PTO pumps, overhead tanks, and rain-fed gravity systems alike.
Kamal Agrotech LDPE Lapeta Pipe Specifications:
Specifications | Details |
Product Name | Kamal Agrotech LDPE Lapeta Pipe |
Brand | Kamal Agrotech |
Material | Pure Nylon LDPE (Low-Density Polyethylene) |
Diameter | 3 inches (75 mm) |
Length Options | 50, 150, 200 feet |
Colour | White |
Wall Thickness | Approx. 0.3 mm (Lay-Flat Type) |
UV Resistance | Yes, UV stabilised |
Working Pressure | High burst pressure (suitable for 3–5 HP pumps) |
Flexibility | Lay-flat (rolls round under water pressure) |
Application | Crop irrigation, sprinkler, flood irrigation, water transfer, greenhouse |
Connector Compatibility | Fits standard 3-inch hose clamps, nut-bolt joints, and rain-pipe accessories |
Storage | Roll up flat for easy storage between seasons |
Country of Origin | India |
How to Use:
Roll out the Lapeta Pipe 3 inch along the line where water needs to flow, keeping the pipe as straight as possible without sharp kinks or twists.
Connect one end of the 3 inch Lapeta Pipe to the pump outlet using a standard 3-inch hose clamp or nut-bolt connector, tightening firmly to prevent leaks.
Connect the other end to the field outlet, sprinkler header, drip filter, or simply leave it open for flood irrigation, depending on the application.
Switch on the pump and let the 3 inch Lapeta Pipe inflate fully; the flat tube will round out as water pressure builds inside.
Walk along the length once during the first run to check for leaks at joints, pinholes in the wall, or kinks that block flow, and fix issues right away.
Avoid dragging the Lapeta Pipe 3 inch over sharp gravel, broken bricks, or stubble; even small punctures grow under pressure and waste water.
For sprinkler or drip systems, attach proper rain-pipe accessories at the field end — male connector, joiner, end cap, and valve — for controlled water release.
After each use, switch off the pump, let pressure release naturally, roll up the 3 inch Lapeta Pipe from one end, and store it on a wooden plank off the bare ground.
Safety Instructions:
Do not run the Lapeta Pipe 3 inch at pressures higher than the recommended rating; sudden bursts can spray water at high force and injure nearby workers.
Avoid laying the 3 inch Lapeta Pipe directly on hot tar roads or freshly burnt stubble, as high surface heat softens the LDPE wall and shortens its life.
Keep the 3 inch Lapeta Pipe clear of livestock pathways and bullock-cart routes, since hoof prints and wheel rolls can crush the pipe and create weak spots.
Disconnect the Lapeta Pipe 3 inch from the pump before flushing chemicals like acid or strong cleaners through any related fitting, as residue can damage the LDPE.
Repair small punctures using a proper plastic-pipe patch kit or heat-welding tape; avoid tying knots in the pipe, as the squeezed-off section weakens over time.
Store the rolled pipe in a shaded, dry place away from rodents, since rats and squirrels gnaw on rolled-up plastic and create pinholes for the next season.
Frequently Asked Questions (FAQs):
Q1. What pump size does the Lapeta Pipe 3 inch work with?
The Lapeta Pipe 3 inch is built for medium-duty 3 HP to 5 HP centrifugal or submersible pumps. Smaller 1-2 HP pumps will fill the pipe too slowly, while pumps above 7.5 HP can build pressure beyond the safe burst limit.
Q2. How do I store the 3 inch Lapeta Pipe between seasons?
After the season, drain the water fully, walk along the pipe to push out residual moisture, then roll up the 3 inch Lapeta Pipe tightly from one end. Store the roll on a wooden plank or shelf in a shaded, dry shed, away from rats, direct sun, and damp floor surfaces.
Q3. Can the Lapeta Pipe 3 inch be repaired if it gets a puncture?
Yes, small punctures and pinholes in the Lapeta Pipe 3 inch can be patched using a plastic-pipe repair kit, rubber patches with cement, or heat-welding tape. For longer tears above 2 inches, cut out the damaged section and rejoin with a hose-joiner coupling.
Q4. Why is the white colour better than green or yellow 3 inch Lapeta Pipe?
The white finish on the 3 inch Lapeta Pipe reflects sunlight, keeping the water inside up to 3-5°C cooler than dark-coloured pipes. This matters for tender vegetable seedlings and drip-irrigated crops, where hot water can shock young roots and slow down growth.
Q5. How long does the Lapeta Pipe 3 inch last in regular farm use?
With proper handling and seasonal storage, the Lapeta Pipe 3 inch gives 3 to 5 years of regular farm service. UV stabilisation helps it resist sun damage, but heavy dragging on rough ground, freezing temperatures, and over-pressure use can cut the lifespan short.