The Radhe Agri 4 MT Nozzle For Sprayer Pump is a 4-hole brass spray nozzle designed to deliver uniform, even distribution of pesticides, herbicides, fertilizers, and water across farms and gardens. The four precisely arranged holes provide a consistent spray that reduces gaps in coverage and minimises liquid waste per application. This 4 nozzle sprayer can be fitted to various standard Indian battery-operated and manual knapsack sprayers.
Key Features & Benefits of Radhe Agri 4 MT Nozzle:
Improves Coverage: The 4 nozzle sprayer has a 4-hole design that helps cover a larger area with better efficiency.
Uniform Distribution: This sprayer has evenly sized holes, which helps create equally sized droplet distribution that reduces over-spraying.
Wide Compatibility: This 4 nozzle sprayer fits most battery-operated and manual knapsack sprayer pumps commonly used in India.
Corrosion Resistant: This 4 nozzle sprayer is made from high-quality brass, stopping corrosion from repeated exposure to pesticides, liquid fertilizers, and herbicides.
Easy Maintenance: This sprayer nozzle can be installed and removed easily for easy cleaning and swapping.
Radhe Agri 4 MT Nozzle Specifications:
Specification | Details |
|---|
Product Name | Radhe Agri 4 MT Nozzle For Sprayer Pump |
Brand | Radhe Agri Center |
Number of Holes | 4 |
Material | Brass |
Thread Type | Indian Brass Thread (Standard Sprayer Compatible) |
Compatible With | Battery Sprayers, Manual Knapsack Sprayers |
Pack Contents | 2 Nozzle Pieces per Pack |
Spray Pattern | Multi-hole — Uniform Distribution |
Country of Origin | India |
Category | Equipments — Sprayer Accessories |
How to Use Radhe Agri 4 MT Nozzle:
Switch off the sprayer pump and fully release all tank pressure before attaching or changing the nozzle.
Screw the 4 nozzle sprayer head clockwise onto the lance tip until it sits firmly with no gaps or wobbles.
Fill the sprayer tank with the required chemical solution at the correct dose as per label instructions.
Build pressure by pumping the handle or switching on the battery motor.
Hold the lance 30–45 cm above the crop canopy and move in slow, steady passes. The four-hole pattern covers a wider band per stroke than a single-hole nozzle.
Adjust pump pressure to control droplet size and spray width, and avoid excessive pressure that causes fine drift.
After every spray session, flush this 4 nozzle sprayer head by running clean water through the pump for 1–2 minutes.
Unscrew, rinse each hole individually, and store in a dry place to prevent chemical deposits from blocking the openings.
Care and Maintenance:
Rinse the nozzle thoroughly with clean water after every use — chemical residue left inside the holes can dry and cause blockages that distort the spray pattern.
Inspect all four holes before each spray session — hold the nozzle up to light and check for any blocked, enlarged, or asymmetric openings that indicate wear or damage.
If a hole becomes partially blocked, soak the nozzle in clean water for 10–15 minutes and use a soft brush to clear it — never use a metal pin or wire as this widens the hole and permanently affects spray uniformity.
Check the brass thread for any cross-threading or damage after every attachment and detachment — damaged threads cause leaks at the lance connection during spraying.
Store the spare nozzle from the pack in a clean, dry container away from moisture and chemical exposure to keep it in ready-to-use condition.
Replace the nozzle when the spray pattern becomes visibly uneven, the flow rate drops noticeably, or any hole shows signs of enlargement. A worn 4 nozzle sprayer head wastes chemicals and reduces crop coverage quality.
Frequently Asked Questions (FAQs) — Radhe Agri 4 MT Nozzle For Sprayer Pump:
Q1. What is a 4-hole nozzle used for in a sprayer pump?
A 4 nozzle sprayer head distributes spray liquid through four evenly arranged holes simultaneously, producing a wider, more uniform spray pattern than a single-hole nozzle. It is used for applying pesticides, herbicides, fungicides, and liquid fertilizers on field crops, vegetables, and fruit orchards, where even canopy coverage is essential for effective results.
Q2. Is this nozzle compatible with all sprayer pumps?
The Radhe Agri 4 MT Nozzle uses a standard Indian brass thread that fits most battery-operated and manual knapsack sprayer pumps widely available across India. For sprayers with non-standard thread sizes, check the lance tip thread before purchasing. Most standard 1/4" BSP thread sprayers used in Indian agriculture are compatible.
Q3. How is a 4-hole nozzle different from a single-hole nozzle?
A single-hole nozzle sprays in one concentrated stream, suitable for targeted applications but requiring more passes to cover a full row. A 4 nozzle sprayer head spreads the same liquid across four openings, producing wider, more even coverage per pass, reducing total spraying time, and delivering a more uniform coat across the entire crop canopy.
Q4. How do I clean a 4-hole brass nozzle if it gets blocked?
Remove the 4 nozzle sprayer from the lance after releasing all pressure. Soak in clean water for 10–15 minutes to loosen any dried chemical deposits. Use a soft brush to clear each hole gently; never use a metal wire or pin, as this permanently enlarges the hole and distorts the spray pattern. Flush under running water and inspect all four holes against light before reassembling.
Q5. When should I replace a brass sprayer nozzle?
Replace the 4 nozzle sprayer when the spray pattern becomes uneven, output from any of the four holes differs visibly from the others, or the flow rate drops noticeably even at correct pressure.
