Farmio Sudarshan Grass Cutter - Brush Cutter Machine

The Sudarshan Grass Cutter is a battery-operated Grass Cutter Machine built for lawn care, garden edging, and crop pruning across Indian farms and gardens. The unit combines a high-speed copper-winding motor with a sharp carbon-steel blade, giving a clean, single-pass cut on weeds, tall grass, and dense undergrowth. This Grass Cutter machine is single-handed, lightweight, smoke-free, and silent enough to use near houses, schools, and cattle sheds. The 90-degree adjustable head, sturdy polycarbonate shaft, and protection guard make this Brush Cutter Machine equally useful for trimming wall edges and pruning standing crops like tur, chana, and soybean.

Key Features and Benefits:

• Powerful Copper Motor: The Sudarshan Grass Cutter uses a copper-winding motor running at 8500 to 14000 RPM, delivering a strong, steady cut on tough weeds and woody stems.

• Sharp Carbon-Steel Blade: The Brush Cutter Machine comes with a hardened carbon-steel or stainless-steel blade that stays sharp through season-long use without frequent replacement.

• Lightweight Operation: The compact body of the Sudarshan Grass Cutter machine can be operated single-handed, with far less arm and back fatigue than petrol-engined cutters.

• 90-Degree Adjustable Head: The cutting head pivots up to 90 degrees, letting the user trim flat lawns, vertical hedges, and tricky corners along walls and fences.

• Dual Power Source: The Brush Cutter Machine runs on a 12V 4.5Ah battery and can also be powered directly from the auxiliary socket of a 12V battery sprayer pump, saving the cost of a second battery.

• Eco-Friendly Operation: The Sudarshan Grass Cutter machine uses no petrol, oil, or herbicide, cutting fuel costs to zero while keeping the soil and water free of chemical residue.

• Multi-Purpose Use: The Brush Cutter Machine handles lawn edging, weed control, hedge trimming, and crop pruning on tur, chana, and soybean — one tool for the whole farm.

Sudarshan Grass Cutter Machine Specifications:

How to Assemble:

• Unpack the Sudarshan Grass Cutter machine and lay out all parts: motor head, polycarbonate shaft, blade, protection guard, shoulder belt, connecting cable, and Allen key.

• Slide the polycarbonate shaft into the motor head socket and tighten the locking screw using the supplied Allen key.

• Attach the carbon-steel blade to the blade holder at the cutting end of the shaft, lining up the bolt holes carefully.

• Tighten the blade nut firmly with the Allen key, then give the blade a quick spin by hand to confirm it sits true with no wobble.

• Fix the protection guard above the blade using the supplied bracket; this shields the operator from flying debris during cutting.

• Connect the power cable from the motor to the battery socket; the battery sits in the shoulder bag worn on the back.

• Adjust the shoulder belt to spread the weight evenly across both shoulders for easy single-handed control during long sessions.

• Charge the battery fully for 3 to 4 hours using the original charger before the first use.

• Power-test the Brush Cutter Machine on a small patch of grass to confirm smooth start-up, blade balance, and battery contact before tackling the main field.

Safety Instructions:

• Always wear safety goggles, sturdy closed shoes, gloves, and full-length trousers before starting the Sudarshan Grass Cutter machine to protect against flying stones and grass chips.

• Keep children, livestock, and other workers at least 15 feet away from the cutting zone; the spinning blade can fling small stones at high speed.

• Never run the Brush Cutter Machine without the protection guard fitted, even for a quick trim — exposed blades are the leading cause of operator injuries.

• Disconnect the battery cable completely before changing the blade, removing a jam, or cleaning the cutting head to avoid accidental start-up.

• Avoid using the Brush Cutter Machine on wet or dewy grass; slippery footing increases the risk of slips, and water near the battery socket can cause shorting.

• Stop the unit and let the motor cool for 5 minutes if it gets unusually warm, since continuous high-load work can overheat the copper windings.

Frequently Asked Questions (FAQs):

Q1. Can the Sudarshan Grass Cutter machine be powered by my existing battery sprayer pump?

Yes, the Sudarshan Grass Cutter machine is designed to plug directly into the auxiliary 12V socket of a standard battery sprayer pump. This dual-power option saves the cost of a second dedicated battery and lets farmers switch between spraying and cutting using one power pack.

Q2. What's the difference between a battery-operated and petrol Brush Cutter Machine?

A battery Brush Cutter Machine, like the Sudarshan Grass Cutter machine, is lightweight, smoke-free, low-noise, and has zero fuel cost. A petrol cutter is more powerful for thick woody bush, but is heavier, runs hot, gives off exhaust fumes, and costs ₹100-150 per hour in fuel — a real concern for small farms.

Q3. How long does one full battery charge last on the Sudarshan Grass Cutter Machine?

A fully charged 12V 4.5Ah battery gives 3 to 5 hours of continuous cutting with the Sudarshan Grass Cutter machine, enough to clear about 1 acre of light grass or trim 0.5 acre of dense weeds. Larger 8Ah or 12Ah batteries give proportionally longer runtime.

Q4. Can the Brush Cutter Machine really be used to prune standing crops like tur and chana?

Yes, the Brush Cutter Machine is widely used by farmers to top-prune tur, chana, soybean, and similar crops at the right growth stage. Pruning the apex shoot pushes the plant to grow more side branches, leading to more pods per plant and a 20 to 50% jump in final yield.

Q5. Is the Brush Cutter Machine suitable for thick woody bushes and tree saplings?

The Brush Cutter Machine handles soft to medium-thick weeds, lawn grass, and crop stems up to about 8 mm thickness comfortably. For thick woody bush, large saplings, or stems above 15 mm, a more powerful petrol-engined brush cutter is the better tool.