Pest-N-Trol Bird and Pigeon Repeller Multipurpose Use Garden, Industries And Home, Very Easy To Use.
In Stock

Descriptions

LS 2020 B:- Battery Operated (1000 Sq. Ft Area)

For mobility, the super bird repeller is powered by batteries. The bird repelling program is simple, maintenance-free, and cost-effective thanks to the non-location limit feature.

The super bird repeller uses powerful frightening techniques to manage airfield birds, making it an extremely effective bird-scaring machine. A mix of predatory bird sounds and cries, as well as an incredibly bright flashing light.

The device's combination of predatory bird calls and screams, as well as very bright flashing strobes, successfully and compassionately repels nuisance birds and undesirable wild animals.

HOW TO INSTALL

Battery operation:

1. Take the Battery Compartment Housing off by holding the upper part of the unit and turning the cylinder housing left to open. You will see the battery compartment for 6 pcs. of D-size battery.

2. Insert the batteries properly by following the polarity of , and on the battery holder.

3. Slide the switch to AUTO Mode.   The bio-acoustic sounds of birds come up plus the flashing strobes to show the batteries are installed properly.

4. Turn the switch to the OFF position and replace the Battery Compartment Housing and turn it right to cover the battery compartment.

5. After setting the device properly, the PIGEON AND BIRD REPELLER can be installed at any location outdoors. For best results, hang or place the device at 1 to 2.5 meters above the ground. Please avoid obstructions within the operation area of the device while in PIR Mode.

6. For larger areas such as big yards, farms, orchards, vineyards, fish cultivation areas, or large fields, it is suggested to use the AUTO Mode and adjust TIME INTERVAL, and VOLUME according to the actual environment.

7. Experiment with various locations to find the most effective position to install the PIGEON AND BIRD REPELLER is recommended.

8. The red LED is the built-in LOW BATTERY indicator, blinking while batteries are running low and should be replaced within several days or when the bio-acoustic sounds are not clear. The function is only available for battery operation.

Adaptor operation (adaptor is an optional accessory) :

1. Attach the PIGEON AND BIRD REPELLER to a post or wall at 1 to 2.5 meters above the ground where the electric power source is accessible. Plug the adaptor (12VDC, female plug) into the power socket.

2. Set the switch to AUTO mode first to adjust the volume. Set the Mode switch and control buttons/knobs on the CONTROL PANEL according to your requirement.

3. Please note points 5 to 7 of Battery Operation.

HOW TO SETUP AND INSTALL:

1. AUTO Mode: When set to AUTO Mode, the TIME INTERVAL can be adjusted from 5 to 30 minutes by turning the knob clockwise to a longer time interval. You may also adjust the VOLUME control knob depending on the size of the protected area. The PIGEON AND BIRD REPELLER will broadcast sounds and flashing strobes every 5 to 30 minutes automatically.

2. PIR Mode: It takes 45 seconds to warm up. The PIGEON AND BIRD REPELLER will cover a fan-shaped area of 130 degrees at a distance of up to 1000 sq. ft. When any warm-blooded animal or a bird flies into the coverage area, the device will broadcast the sounds with flashing strobes to scare the intruder away. You may adjust the VOLUME knob to suitable loudness. TIME INTERVAL is of no function in the PIR Mode.

3. FLASH button: A built-in FLASH control button is designed to allow canceling flashing strobes once required. When depressing the FLASH button-down, the flashing strobe is off.

4. CDS button: the CDS is a light sensor, when it is on ON, the device is operated only in the daytime. When the CDS is depressed down at OFF, the machine is in operation 24 hours, day and night.

IMPORTANT NOTES:

• The device is weatherproof. Do not immerse the device in water or any other liquids.

• Do not modify or temper the devices internal components.

• The PIR detecting system goes on and off as warm-blooded animals movement starts and stops.

• Make sure the lens is clear. Do not handle the lens. Use a damp cloth to wipe any dirt gently. Use no benzene, alcohol, or paint thinner.

• For a small area or when used for security purposes, it is suggested to set in the PIR Mode.

SPECIFICATIONS:

Dimension: 145 x 145 x 340 mm

Weight: 860 g (main unit only)

Power Source: 6 x D size alkaline battery (LR20 battery)

Optional Power Supply (adaptor): 100 / 240 VAC, 50/60 cycles, Output: 12 VDC (female plug) Sound:     Predatory calls of a hawk, and owl species plus distressed bird calls

Flashing Strobes: Super Bright LED x 3.Protection Coverage:      AUTO Mode: Up to 1000 sq. ft. (when the volume is turned to maximum) PIR Mode: Fan-shaped area of 130°, a distance of up to 1000 square feet

Material: Housing: ABS plastic

LS 2021:- Electrical Operated (Covers 1000 sq. Ft Area)

The most effective bird-repellent system to secure your property.

The bird repeller uses a natural predatory principle to scare unwanted birds away from farms, orchards, gardens, yards, or any other property. The built-in PIR sensor detects movement and the powerful loudspeaker broadcasts predatory calls of the hawk, falcon, and owl species as well as birds in distress.

The option of auto mode with a time interval setting allows the device to generate the signal every 5 - 30 minutes automatically. The bird repeller works in the daytime only when pest birds are active. It's a practical bird scare for agriculture applications when the bird repeller is set on auto mode.

Descriptions

LS 2020 B:- Battery Operated (1000 Sq. Ft Area)