🎉 You Save ₹35 (10% OFF)
Buying In Bulk?
Get Special Pricing for large orders, contact us now!
| Brand: | Noble Crop Science |
| Product Code: | 9031 |
| Country of Origin: | India |
| Category: | Crop Protection |
| Sub Category: | Adjuvants And Surfactants |
Spread-N is an organic silicon-based spreading agent manufactured by Noble Crop Science with a super ability to spread any spray solution uniformly across all leaf surfaces. Spread-N reduces the surface tension of any spray solution down to 20.5 mm/m at 0.1% concentration — causing spray droplets to spread out completely and stick firmly to all leaf surfaces, including waxy, hairy, and glossy ones. When added to insecticides, fungicides, herbicides, and foliar fertilizers, this spreading agent improves coverage, reduces product wastage, and delivers better results from every spray without increasing the dose. Spread-N is suitable for all plants, crops, vegetables, and fruits, and is compatible with most commonly used agricultural inputs.
Better Coverage: This spreading agent ensures spray droplets spread out completely and cover every part of the leaf surface — no missed spots, no product wastage per spray.
Improves Pesticide Performance: When mixed with insecticides or fungicides, Spread-N improves their contact with pest bodies and leaf surfaces, giving better pest and disease control.
Reduces Chemical Usage: Better coverage and absorption from Spread-N means farmers can achieve the same results with lower doses of their crop protection products.
Rainfast Performance: Spray solutions mixed with this spreading agent adhere more firmly to leaf surfaces — maintaining effectiveness even after light rainfall.
Boosts Plant Nutrition: Spread-N also provides essential silicon nutrients to crops, supporting stronger cell walls and better plant vigor alongside its spreading function.
High Compatibility: This spreading agent works with insecticides, fungicides, herbicides, foliar fertilizers, micronutrients, and other agrochemical inputs — one product that improves everything it is added to.
With Insecticides: Spread-N improves contact between spray droplets and pest bodies, especially on waxy insects like Whiteflies, Mealybugs, and Scale Insects that resist standard sprays.
With Fungicides: This spreading agent improves leaf surface coverage and penetration of fungicides, giving better disease control from every spray application.
With Herbicides: Spread-N improves contact with weed leaf surfaces — especially effective on waxy and hairy weeds that resist standard spray droplets.
With Foliar Fertilizers: Adding this spreading agent to foliar nutrition sprays improves absorption of nutrients through leaf surfaces with less product wastage.
With Micronutrients: Spread-N improves leaf absorption of Zinc, Boron, Iron, and other trace elements — particularly important on crops with waxy leaves like Grapes and Bananas.
With Plant Growth Regulators: This spreading agent improves absorption of PGRs and biostimulants through leaf stomata for faster plant response during critical growth stages.
Add Spread-N directly to the prepared spray solution just before spraying. Do not pre-mix with concentrated product — always add to the diluted spray tank.
Crop | Application Method | Dose / Acre | Per 15L Pump | When to Use |
|---|---|---|---|---|
Tomato | With Insecticides / Fungicides | 4–8 ml | 5 ml per 15 liters | Add to every spray for better coverage and penetration |
Chilli | With Insecticides / Fungicides | 4–8 ml | 5 ml per 15 liters | Add to every spray for better pest and disease contact |
Cotton | With Insecticides / Herbicides | 4–8 ml | 5 ml per 15 liters | Add to every spray throughout the season |
Paddy / Rice | With Insecticides / Fungicides | 4–8 ml | 5 ml per 15 liters | Add to every spray for better leaf adhesion |
Grapes | With Fungicides / Foliar Fertilizers | 4–8 ml | 5 ml per 15 liters | Add to fungicide and nutrition sprays |
Potato | With Fungicides / Herbicides | 4–8 ml | 5 ml per 15 liters | Add to every spray for better coverage |
Okra | With Insecticides / Foliar Fertilizers | 4–8 ml | 5 ml per 15 liters | Add to every insecticide and nutrition spray |
Cucurbits | With Insecticides / Fungicides | 4–8 ml | 5 ml per 15 liters | Add to every spray for better coverage on waxy leaves |
Floriculture | With Foliar Fertilizers / Micronutrients | 4–8 ml | 5 ml per 15 liters | Add to every foliar nutrition spray |
All Other Crops | With Any Foliar Spray | 4–8 ml | 5 ml per 15 liters | Add to any insecticide, fungicide, herbicide, or fertilizer spray |
Note: Never exceed the recommended dose of 5 ml per 15 liters.
Prepare the spray solution by mixing the required pesticide or fertilizer dose in the sprayer tank with the required volume of water.
Once the spray solution is fully prepared and uniform, add 5 ml of Spread-N per 15 liters of solution.
Stir gently after adding this spreading agent — avoid vigorous shaking as excessive foaming can occur.
Begin spraying immediately after mixing — do not allow the solution to stand for too long after adding Spread-N.
Apply evenly across all plant surfaces — the reduced surface tension will visibly improve how the solution spreads on leaf surfaces.
Rinse the sprayer completely with clean water after every use to prevent any residue from building up inside the tank.
Store the remaining Spread-N in its original sealed container away from direct sunlight.
Add Spread-N to any spray applied in the early morning or late evening — cool temperatures and higher humidity improve the spreading and absorption of the spray solution on all leaf surfaces.
Frequency of Application: Add Spread-N to every foliar spray throughout the season — it is not a standalone product and should always be used alongside insecticides, fungicides, herbicides, or foliar fertilizers.
Re-Entry Period: Safe to re-enter treated areas as soon as the spray has completely dried on plant surfaces.
Compatibility: This spreading agent is compatible with most insecticides, fungicides, herbicides, and foliar fertilizers. Always do a jar test before combining with any new product to confirm compatibility.
Wear gloves and goggles while measuring and handling this product.
Never eat, drink, or smoke during mixing or application.
Wash all exposed skin with soap and water after finishing.
Keep children and farm animals away from treated areas until the spray has dried.
Keep away from food, animal feed, and drinking water sources.
Dispose of empty containers as per local waste disposal guidelines.
Keep Spread-N in the original sealed container in a cool, dry, shaded area away from direct sunlight and heat.
Never store near food items, animal feed, seeds, or drinking water.
Keep completely out of reach of children and farm animals.
Storage Temperature: Below 35°C
Shelf Life: 2 years from the date of manufacture.
Specifications | Details |
|---|---|
Product Name | Spread-N Silicon-Based Organic Spreading Agent |
Type | Organic Silicon-Based Agricultural Spreading Agent |
Composition | Organic Silicon with Super Spreading Ability |
Surface Tension Reduction | 20.5 mm/m at 0.1% concentration |
Formulation Type | Liquid (L) |
Mode of Action | Reduces Surface Tension — Improves Spray Coverage and Absorption |
Brand | Noble Crop Science |
Method of Use | Add to the spray solution 5 ml per 15 liters |
Recommended For | All crops — use with insecticides, fungicides, herbicides, and foliar fertilizers |
Pack Sizes Available | 1 liter, 5 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1 L |
Country of Origin | India |
Shelf Life | 2 years from the date of manufacture |
Spread-N is an organic silicon-based spreading agent added to insecticides, fungicides, herbicides, and foliar fertilizers to reduce surface tension, improve spray coverage, and enhance the performance of every product it is mixed with across all crops.
When added to any spray solution, this spreading agent reduces surface tension, causing spray droplets to spread uniformly across all leaf surfaces — including waxy and hairy ones — instead of beading up and rolling off. This gives better coverage, faster absorption, and more consistent results from every spray.
Add 5 ml of spreading agent per 15 liters of prepared spray solution. Always add to the diluted spray tank — never add directly to the concentrated product. Do not exceed this dose as over-application can cause excessive run-off.
Yes — this spreading agent is compatible with most insecticides, fungicides, herbicides, foliar fertilizers, and micronutrient products. Always do a jar test before combining with any new product to confirm compatibility before field application.
It is an organic silicon-based spreading agent with a super ability to spread, reducing surface tension to 20.5 mm/m at just 0.1% concentration. This is significantly lower than most regular wetting agents, giving better and more uniform spray coverage from every application.
No reviews yet. Be the first to review this product!
