Indofil Avtar is a dual-action fungicide that provides protective and curative action to protect crops from fungal diseases like black rot and sheath blight. Indofil Avtar fungicide is compatible with commonly used pesticides, increasing the overall effectiveness of the product. It inhibits fungal cell development and stops the formation of fungal diseases through systemic and contact action. Indofil Avtar fungicide provides zinc to crops like paddy and tea, regulating the growth process and promoting higher yield.
Key Features and Benefits of Indofil Avtar Fungicide:
Broad-Spectrum Protection: Indofil Avtar fungicide effectively treats a wide range of fungal diseases, including sheath blight, brown spot, and leaf spots.
Low Toxicity: This fungicide has low toxicity levels and is relatively safer to use with minimal risk, making it eco-friendly.
Improves Nutrient Content: Avtar fungicide contains an essential micronutrient, zinc, that plays a crucial role in protein synthesis and growth regulation.
Higher Yields: A significant increase in crop growth can be noticed as it helps crops grow pest-free and healthy.
Avtar Fungicide Uses:
Indofil Avtar Fungicide is effective against a wide range of fungal diseases across:
Paddy (Rice) — Sheath Blight, Leaf Blast, Brown Leaf Spot, Grain Discoloration
Tea — Blister Blight, Red Rust, Grey Blight
Apple — Scab, Powdery Mildew, Alternaria Leaf Blotch
Maize — Rust, Leaf Blight, Downy Mildew
Cotton — Alternaria Leaf Spot, Grey Mildew, Rust
Grapes — Anthracnose, Powdery Mildew, Downy Mildew
Chilli — Anthracnose, Fruit Rot, Leaf Spot
Tomato — Early Blight, Late Blight, Leaf Spot
Potato — Early Blight, Late Blight
Groundnut — Tikka Leaf Spot, Rust
Soybean — Rust, Anthracnose
Onion & Garlic — Purple Blotch, Downy Mildew
Avtar Fungicide Dose Per Litre:
Apply Indofil Avtar Fungicide as a foliar spray at the recommended dose. Always follow the crop-specific PHI before harvest.
Crop | Target Disease | Dose / Acre | Per Litre | Per 15L Pump | PHI |
Paddy | Sheath Blight, Blast, Brown Spot | 250–400 gm | 1.25–2 gm | 18–30 gm | 30 days |
Tea | Blister Blight, Red Rust | 300 gm | 1.5 gm | 22 gm | 14 days |
Apple | Scab, Powdery Mildew | 400–500 gm | 2–2.5 gm | 30–37 gm | 21 days |
Maize | Rust, Leaf Blight | 300–400 gm | 1.5–2 gm | 22–30 gm | 21 days |
Cotton | Alternaria Leaf Spot, Grey Mildew | 300–400 gm | 1.5–2 gm | 22–30 gm | 21 days |
Grapes | Anthracnose, Powdery Mildew | 400 gm | 2 gm | 30 gm | 7 days |
Chilli | Anthracnose, Fruit Rot | 300 gm | 1.5 gm | 22 gm | 7 days |
Tomato | Early & Late Blight | 300 gm | 1.5 gm | 22 gm | 5 days |
Potato | Early & Late Blight | 300–400 gm | 1.5–2 gm | 22–30 gm | 14 days |
Groundnut | Tikka Leaf Spot, Rust | 300 gm | 1.5 gm | 22 gm | 30 days |
Soybean | Rust, Anthracnose | 300 gm | 1.5 gm | 22 gm | 21 days |
Onion | Purple Blotch, Downy Mildew | 300 gm | 1.5 gm | 22 gm | 7 days |
How to Use Indofil Avtar Fungicide:
Open the Avtar Fungicide pack carefully and measure the required quantity using a clean spoon or weighing cup.
Wear gloves and a face mask before measuring the product.
Half-fill the spray tank with clean water.
Slowly add the measured Avtar Fungicide into the tank while stirring continuously until fully dissolved.
Add the remaining water and mix thoroughly to form a uniform spray solution.
Use a fine-mist or hollow-cone nozzle for proper coverage.
Spray during calm weather, covering both upper and lower leaf surfaces.
Use a high-volume knapsack sprayer for effective canopy coverage.
Best Time to Apply:
Spray Indofil Avtar Fungicide at the preventive stage — before disease symptoms appear or as soon as the first few spots or lesions show up on the leaves. Late afternoon or early evening is the best window, as leaf temperature is cooler and product absorption is stronger.
Frequency of Application and Re-entry Period:
Frequency: 2 to 3 sprays of Avtar Fungicide per crop cycle at 10 to 15-day intervals, depending on disease pressure and weather. The first spray should be done soon after the infection appears, and subsequent sprays at 10 to 15-day intervals.
Re-Entry Period: Wait 12 to 24 hours after spraying before re-entering the treated field without protective clothing.
Compatibility: Indofil Avtar Fungicide mixes well with most common insecticides and water-soluble fertilizers. For better results, add a spreader or sticker (adjuvant) with the Avtar Fungicide spray. Avoid mixing with strongly alkaline products like Bordeaux mixture and lime sulfur. Always run a small jar test before a new tank-mix.
Safety, Precautions and Handling:
Wear hand gloves, face mask, and protective eyewear while handling the product.
Do not eat, drink, or smoke during mixing or spraying.
Spray downwind and keep children, pets, and livestock away from treated fields.
Wash hands and exposed body parts with soap and water after use.
In case of accidental ingestion, contact a doctor immediately with the product label.
Storage Instructions:
Store Indofil Avtar Fungicide in a cool, dry, and well-ventilated place away from direct sunlight.
Keep away from food, animal feed, and drinking water sources.
Store in the original container with the cap tightly closed to prevent moisture absorption.
Keep Indofil Avtar fungicide out of reach of children, pets, and livestock.
Storage Temperature: Below 30°C
Shelf Life: 24 months from the date of manufacture.
Product Specification:
Specification | Details |
Product Name | Indofil Avtar Fungicide |
Manufacturer | Indofil Industries Limited |
Technical Name | Hexaconazole 4% + Zineb 68% WP |
Formulation Type | Wettable Powder (WP) |
Mode of Action | Systemic + Contact |
Category | Broad-Spectrum Dual-Action Fungicide with Zinc Nutrition |
Target Disease Type | Rust, Powdery Mildew, Downy Mildew, Leaf Spot, Blight, Anthracnose, Sheath Blight, Blast, Alternaria, Scab |
Recommended For | Paddy, Tea, Apple, Maize, Cotton, Grapes, Chilli, Tomato, Potato, Groundnut, Soybean, Onion |
Pack Sizes Available | 100 gm, 250 gm, 500 gm, 1 kg |
Country of Origin | India |
Shelf Life | 2 Years from date of manufacture |
Pre-Harvest Interval (PHI) | 5 – 30 Days (crop-dependent) |
Application Method | Foliar Spray |