Please call us on 7428208822 for any query
Please call us on 7428208822 for any query
To stop the flow of water through a 16 mm outer diameter supply hose or soaker hose, the end plug is vital to enable pressure to build up within your irrigation system.
Introduction: Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system connected together. Hose connector constructed of durable sunburn-resistant and chemical corrosion resistant materials to assure long-term usage.
Specifications:
Type: hose connectors stop end cap plugs set for 16 mm drip irrigation tubing
Material: HDFE plastic Color: black
Installation tips: 1. To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight leak-proof device.
2. Soften the tubing before installing the fitting, you can put the tubing under the hot sun or apply a blow dryer briefly before inserting the fitting.
Notes: 1. If the connector have a leakage problem, you can use sealing tape reinforced leak proof.
2. Recommended for 0 to 50 PSI operating pressure. End Cap for closing off drip irrigation mainline end. This figure 8 clamp is made out of high-quality ABS material that is UV resistant. Now easily shut off the drip irrigation line by just sliding on this endcap.
Long Life and Durable material
WELL DESIGN FOR DRIP IRRIGATION PURPOSE
Micro Irrigation 16mm Diameter Main Supply Line Pipe Endcaps for watering the plants.
Fit size: these 16 mm barbed fittings work with half inch drip tubing, whose inside diameter is from 0.560 to 0.600; Compatible with many types of tubing as well as generic 1/2 inch blank tubing or drip lines
Drip Irrigation system saves 70% of water and also right amount of water slowly and precisely right where your plant needs it - Can be used to water plants in Terrace, Balcony, Ground Garden space.