JU Get Set is a silicone-based non-ionic surfactant used to improve the spreading, wetting, and absorption of foliar spray solutions. Get Set helps spray droplets spread evenly on the crop surface instead of forming beads and rolling off. JU Get Set is useful with insecticides, fungicides, herbicides, foliar fertilizers, micronutrients, and plant growth products when label guidance allows mixing. Get Set supports better contact between the spray solution and leaves, stems, weeds, or pest-active areas. JU Get Set is suitable for all crops and helps farmers get better coverage from every spray. Get Set is especially useful on waxy, hairy, or hard-to-wet crop surfaces.
Key Features and Benefits of Get Set:
Better Spray Spreading: JU Get Set reduces surface tension and helps spray droplets spread more evenly on the crop surface.
Improved Wetting: Get Set helps the spray solution stick and wet leaves properly, especially on waxy or smooth leaf surfaces.
Better Absorption Support: JU Get Set improves the entry of systemic and translaminar agro-inputs through treated plant surfaces.
Uniform Crop Coverage: Get Set helps cover more leaf area with the same spray solution, reducing uneven application.
Useful With Many Sprays: JU Get Set can be used with many pesticides, foliar fertilizers, micronutrients, and growth products.
Rainfast Support: Get Set helps quicker spreading and absorption after spray drying, which may reduce wash-off risk under light rain conditions.
Easy Liquid Formulation: JU Get Set is easy to measure, mix, and add into the spray tank during regular farm spraying.
JU Get Set Uses:
With Insecticide Sprays: JU Get Set helps insecticide spray spread on leaves and pest-hiding areas for better contact.
With Fungicide Sprays: Get Set helps fungicide solution cover the crop surface more uniformly for better disease-protection support.
With Herbicide Sprays: JU Get Set helps herbicide droplets spread on weed leaves, especially on waxy and difficult weed surfaces.
With Foliar Fertilizers: Get Set supports better leaf wetting and nutrient contact during foliar nutrition sprays.
With Micronutrients and PGRs: JU Get Set helps improve spray coverage for zinc, boron, iron, amino acids, seaweed, and plant growth products.
JU Get Set Dose:
Use JU Get Set only as a tank-mix adjuvant with clean water and compatible spray products. JU Get Set Dosage is 5 ml per 15-litre spray pump, or 40 to 50 ml per acre. Get Set should be added after the main spray solution is diluted in the tank. Stir the spray mixture well before application.
Crop | Target Purpose | Dose per Acre | Application Method | PHI |
|---|
All Field Crops | Better spreading and wetting of spray solution | 40 to 50 ml | Add to diluted foliar spray solution | Follow mixed product label |
Vegetables | Better coverage on leaves, flowers, and fruits | 40 to 50 ml | Tank mix with compatible spray products | Follow mixed product label |
Fruits | Better canopy wetting and spray distribution | 40 to 50 ml | Foliar spray with proper water volume | Follow mixed product label |
Cotton and Pulses | Better pest and disease spray coverage | 40 to 50 ml | Add to insecticide or fungicide spray if compatible | Follow mixed product label |
Weed Management Sprays | Better wetting on weed leaf surface | 40 to 50 ml | Add to compatible herbicide spray | Follow herbicide label |
Foliar Nutrition Sprays | Better leaf contact and absorption support | 40 to 50 ml | Add to foliar fertilizer or micronutrient spray | Not applicable |
How to Use JU Get Set:
Prepare the main spray solution first with clean water.
Add pesticide, fertilizer, micronutrient, or growth product as per its label directions.
Stir the tank solution properly before adding JU Get Set.
Measure Get Set at 5 ml per 15 litres of water.
Add JU Get Set into the diluted spray tank, not into concentrated product.
Mix the tank solution properly for even distribution.
Spray Get Set mixture uniformly on the crop surface.
Cover upper leaves, lower leaves, tender parts, flowers, fruits, or weeds as per spray purpose.
Use Get Set only with compatible products and avoid unknown tank mixes.
Do not exceed the recommended quantity of JU Get Set.
Avoid spraying during strong wind, rainfall, or very hot afternoon weather.
Use the prepared Get Set spray solution on the same day.
Best Time to Apply:
Use JU Get Set whenever better wetting, spreading, and absorption are needed in foliar sprays. Get Set is best added during insecticide, fungicide, herbicide, foliar fertilizer, micronutrient, or PGR sprays when label compatibility allows it. Morning or evening application is better because spray drying is more balanced and crop stress is lower. JU Get Set should not be used when rain is expected immediately, during strong wind, or on severely stressed crops.
Frequency of Application and Re-entry Period:
Frequency of Application: JU Get Set may be used whenever a compatible foliar spray is planned. Use Get Set only at the recommended dose and avoid unnecessary overuse.
Re-Entry Period: Follow the re-entry period of the pesticide, herbicide, fungicide, or fertilizer mixed with JU Get Set. If used alone, allow the spray to dry before entering the field.
Compatibility: Get Set is compatible with many agricultural inputs, but a jar test is advised before mixing with new or unknown products.
Application Care: JU Get Set performs better when water quality is good, and the tank mixture is stirred properly.
Mixing Care: Do not mix Get Set with strong alkaline products, harsh chemicals, or products where the label does not allow adjuvant use.
Safety Precautions and Handling:
Read the label carefully before using JU Get Set.
Wear gloves, mask, goggles, long sleeves, and protective footwear while handling Get Set.
Do not eat, drink, smoke, or chew anything during mixing or spraying.
Avoid direct contact with skin, eyes, and mouth.
Do not inhale spray mist while applying JU Get Set with any spray solution.
Keep Get Set away from ponds, canals, wells, drinking water, and animal water sources.
Follow all safety precautions of the main pesticide or fertilizer mixed with JU Get Set.
Do not exceed the recommended dose of Get Set.
Wash hands, face, and exposed skin properly after spraying.
Keep children, animals, and unprotected workers away until the spray dries.
Storage Instructions:
Store JU Get Set in its original sealed bottle.
Keep Get Set in a cool, dry, shaded, and well-ventilated place.
Keep JU Get Set away from direct sunlight, moisture, heat, and open flame.
Store Get Set away from food, animal feed, drinking water, seeds, and household items.
Keep JU Get Set out of reach of children and farm animals.
Close the bottle tightly after use.
Do not store leftover mixed Get Set spray solution for later use.
Do not reuse empty bottles for household or farm storage.
Storage Temperature: Follow the storage instruction printed on the pack.
Shelf Life: Check the pack label before use.
Product Specification:
Specifications | Details |
|---|
Product Name | JU Get Set Customized Spreading And Wetting Agent |
Brand Name | JU Agri Science Pvt Ltd. |
JU Get Set Technical Name | Silicone-based non-ionic surfactant |
Formulation Type | Liquid adjuvant / surfactant |
Product Type | Spreading and wetting agent |
Mode of Action | Reduces spray-solution surface tension and improves spreading, wetting, and absorption support |
IRAC Group | Not applicable |
FRAC Group | Not applicable |
Recommended For | All crops |
Pack Sizes Available | 100 ml |
Country of Origin | India |
Shelf Life | Check pack label |
Pre-Harvest Interval | Follow the label of the mixed spray product |
Application Method | Tank-mix adjuvant for foliar spray |
Recommended Dose | 5 ml per 15-litre spray pump or 40 to 50 ml per acre |
Target Purpose | Better spreading, wetting, coverage, penetration, absorption support, and spray efficiency |
Product Category | Adjuvant and Surfactant |
